Sunday, February 20, 2005

Temperature is now quantified in the Aether Physics Model

Today I was experimenting with a Crooke's Radiometer.  I thought I would focus an intense beam of light on just the silvered vanes and then focus the light on just the black vanes.  In so doing I found, as others have, that light reflecting off the silvered vanes does nothing.  But light being absorbed by the black vanes imparts force and the vanes turn.
In high school classes the explanation is sometimes erroneously given that particles of light bounce off the vanes causing it to spin.  But the spin is in the opposite direction of what it should be if light were particulate.  So the Crooke's radiometer is actually a demonstration that proves light is NOT particulate.
In the Aether Physics Model light is dimensionally shown to be accelerated angular momentum made up of photons streaming at a given frequency.  The photon itself is quantum and is equal to the angular momentum of the electron times the speed of light.  As the photon is absorbed by a given area, it imparts a force.
---- = forc
Some physicists try to explain the moving vanes as being caused by heated molecules.  If heat is applied to the black vane, nearby gas molecules would be expelled away from the black vane.  But since the pressure inside the bulb is isotropic (equally distributed), all that would happen is the gas would become less dense near the vane.  But this explanation about heated gas molecules got me curious about the relationship of pressure to mass density and temperature. 
A quick search got me to a page that gives the relationship of pressure, mass density of air, and temperature.  Since all three variables were given, I could setup a simple relationship:
pres = masd * temp
Pressure is equal to mass density time temperature.  Doing a simple dimensional analysis it turned out that temperature would be in units of sievert (velocity squared).  The sievert is the unit for dose equivalent and is a measurement of radiation.  It makes sense then that the sievert could be the unit for temperature. 
Since I knew from the above relationship that pressure is equal to mass density times temperature, and because I found that one atmosphere is equal to 1.2929 kg/m^3 times zero degrees centigrade, I was in a position to calculate the temperature to sievert conversion.  The Kelvin scale is better for measuring temperature because the scale starts at zero and increases.  The Celsius and Fahrenheit scales begin with a negative value and increase to a zero value before increasing with a positive value.  So by doing simple algebra I was able to determine that one degree Kelvin is equal to 286.966 sievert. 
Assuming the unit of sievert is the unit of temperature, I checked its relationship to other units:
pres * volm / mass = temp
An interesting relationship is:
momt * temp = ligt
Accordingly, if an object with momentum increases in temperature, its light will increase (in frequency).  Or if an object has a certain temperature and its momentum increases, then the frequency of light it radiates will also increase.  The same would hold true for a radio on a spaceship.  If the spaceship had a momentum toward Earth and a constant temperature, then an increase in the ship's speed would increase the radio frequency.  Because momentum is a vector quantity, an increase in the ship's speed going away from the Earth would decrease the frequency.  This, of course, is the Doppler effect.
If more analysis proves that temperature is actually measured in units of velocity squared, this would be a significant leap for physics as it would give temperature a true dimensional connection with all other units.

Saturday, February 19, 2005

Inductance Equation

The Aether Physics Model predicts that inductance and capacitance can be calculated with the following equations:

L = V/4piF^2

where V is the potential and F is frequency.

In the APM frequency squared is equal to the unit of resonance. So inductance would be measured as the potential per 4pi resonance. What this means is that there is a potential where resonance will occur in a given circuit. When that potential occurs and the system is resonant, the inductance will be equal to V/4piF^2.

I am reminded by Will Herzog that inductance meters work in this manner. Also, I recall that Nikola Tesla measured inductance using this same technique.

Monday, February 07, 2005

Understanding Units through the Aether Physics Model

The Aether Physics Model shows how all physical matter arises from the unit of angular momentum within a quantum Aether unit. In the Standard Model, units are merely concepts invented by scientists. The APM, however, shows that units are actual elements that make up the Universe. The units are themselves made up of dimensions, which also have real existence.

Contemplate the unit of force, for a moment. Force is equal to pressure times area, so when you press your finger against a surface, you are experiencing force. So press your finger against something right now and hold the pressure. Contemplate for a moment the nature of force.

Can you remove the force and separate it from your finger or the surface you are pressing? Focusing on the force, do you think the force is real? There is no question in our mind that force exists, yet when we look to see exactly what force is, there is nothing to see.

Similarly, we know that acceleration is real when we're falling out of a tree. We know the momentum is real as well as the velocity we are going when we hit the ground. We know that mass is real as we encounter the mass of the Earth. We know that the surface density and surface tension of the objects we hit is real. But where are these real units? Why can't we see them or put them in a jar? Modern science denies the existence of the Aether because they can't measure it. Of course, they measure the Aether all the time when they calculate the gravitational or electrostatic force, but they apparently do not know that. Modern physics believes that if it is not an observable particle, then there is no proof that it exists.

And yet, these same scientists have no problem believing in velocity, momentum, energy, or any other unit.

One of the benefits of the Aether Physics Model is that it corrects the structure of units by expressing all charge as distributed, just as Charles Coulomb explained it must be. When the units are expressed in the correct dimensions, they show a very clear structure, even though the structure is non-material in nature. Understanding this structure of the units gives great insights into physical processes and the overall structure of the Universe.

To my surprise, nobody has ever tried to categorize and systematically investigate all the units. As can be seen at the new page I posted today, the magnetic units do follow a very particular structure. Units have an obverse and inverse existence. All the electrical units fall in one column, the magnetic units in another column, and the stationary units in a third. The top row of units are all fields, or volumetric in nature. The second row are all surface related units, the third row are linear units, and the fourth row are root units. Certain units involve the 4pi constant, and they all fall in specific columns.

Some of the units have not been identified. Noting the pattern within the unit structure, it seems logical that all combinations of dimensions have a real world manifestation of some kind of unit. In order to better understand our world, we need to thoroughly investigate every unit and fully appreciate its manifestation. As I have begun to do this, I am pleasantly surprised to discover that understanding units is also a deep and rewarding metaphysical practice.

Just as we can contemplate a real, but non-material unit, we can appreciate that these non-material units have a lot in common with our non-material mind. The experience of force is not much different from the experience of a thought. The same goes for the experience of velocity, momentum, mass, energy, power, and all other units. We might focus our attention on an object, but our experience of the object always takes place through the units.

By understanding units in great detail, we not only understand the material Universe in which the units exist, but we also understand our experience of the Universe. The link between units and mind becomes delightfully clear and a sense of meaning manifests out of our understanding.

The Aether Physics Model is truly useful as a scientific tool as well as a spiritual path.